Skip to main content

Best CCTV Camera Near You

  • Mail Us : support@yendra.in
Appointment

Menu

Factory CCTV Installation South Bangalore & Hosur | Yendra
Industrial area along the South Bangalore–Hosur corridor
callCall Yendra

Factory CCTV Installation | South Bangalore & Hosur

Factory CCTV Installation Across South Bangalore & the Hosur Industrial Belt

Design and install CCTV around your factory's production areas, warehouses, loading zones, access points and perimeter—with coverage planned around how your facility operates.CCTV planned around how your factory operates.

Book a South Bangalore Factory Site SurveyBook a Factory Site Surveyarrow_forward See Our Industrial Projects
or see our industrial projectsarrow_forward
verifiedServing
  • location_onBommasandra
  • location_onJigani
  • location_onElectronic City
  • location_onBommanahalli
  • location_onAttibele
  • location_onAnekal
  • location_onHosur
  • location_onShoolagiri

See what matters

Every Area of Your Factory Needs the Right Coverage

Production floors, warehouses, loading areas, access points and open perimeters all have different surveillance requirements.Each area of a factory needs different coverage.

Yendra plans your CCTV around the facility layout, operating conditions and security priorities—not simply around where cameras are easiest to install.

Factory areas that need CCTV coverage
Coverage, not camera countYour CCTV should help you see the areas that matter—not simply increase the number of cameras.

touch_appTap the areas you need covered — we'll add them to your site survey request.

Explore CCTV for Factoriesarrow_forward See How Factory CCTV Coverage Is Plannedarrow_forward

Where we work

Factory CCTV Installation Across the South Bangalore–Hosur Industrial Corridor

Yendra serves factories, engineering units, manufacturing facilities and industrial sites across the South Bangalore–Hosur corridor. It's part of our wider factory CCTV installation in Bangalore.Serving factories and industrial sites along the corridor.

KARNATAKA · SOUTH BANGALORE TAMIL NADU · HOSUR BELT NH 44 32-CAMERA PROJECT Bommasandra Jigani Electronic City Bommanahalli Attibele Anekal Hosur Shoolagiri

touch_appSelect an area on the map

Karnataka
Tamil Nadu

touch_appTap your area to start a site survey request

Whether you are setting up a new facility, expanding an existing plant or replacing an outdated CCTV system, we start by understanding what your facility needs to see and protect.New, expanding or replacing — we start with what your facility needs to see.

Book a Factory Site Surveyarrow_forward

Local proof

Real Industrial CCTV Experience in the Hosur–Shoolagiri Belt

Yendra 32-camera industrial CCTV installation at a granite facility in Shoolagiri
location_onShoolagirivideocam32 IP cameras

32-Camera CCTV System for an Industrial Facility in Shoolagiri

A large granite manufacturing and export facility required surveillance across production areas, open storage yards, entry points, offices and its perimeter.A granite facility needing production, yard, entry and perimeter coverage.

Yendra designed the system around the site—with long cable runs, outdoor infrastructure, production-zone coverage and remote monitoring all considered as part of the installation.

32IP Cameras
100m+Cable Runs
FullPerimeter & Production Coverage
24/7Remote Access

The deployment included structured Cat6 cabling, underground conduit, PoE/PoE+ infrastructure, a 32-channel NVR, dual-monitor control-room display and remote mobile access.Cat6, underground conduit, PoE+, 32-channel NVR and remote mobile access.

What this project required
  • mapSite Survey & Zoning
  • routeCable Route Mapping
  • videocamCamera Angle Planning
  • light_modeGlare & Lighting Analysis
  • lanPoE Network Design
  • hard_driveStorage Planning

The result was a surveillance system designed around the actual industrial environment—not simply a collection of cameras installed across the site.

View the Full Maigma Granite Case Studyarrow_forward

How we plan it

Don't Start With Cameras. Start With Coverage.

A factory CCTV system needs more than the right cameras. The layout of your facility determines where cameras should go, what each camera needs to see, how the system should be connected and how much recording capacity is required.Your layout decides camera positions, network and storage.

Yendra plans the system before installation.

CCTV camera covering a factory floor
The principlePlan the coverage first. Install the right system.
  1. 01map

    Site Survey

    Understand the facility, operations, access points and security priorities.

  2. 02radar

    Coverage Plan

    Identify critical areas and determine what each camera needs to see.

  3. 03videocam

    Camera Selection

    Choose the right camera type, resolution, lens and features for each zone.

  4. 04lan

    Network & Storage

    Plan PoE, cabling, fibre where required, NVR capacity, storage and retention.

  5. 05construction

    Installation

    Install cameras, cabling and infrastructure according to the approved design.

  6. 06task_alt

    Commissioning

    Configure, test and verify the system before handover.

swipeSwipe through the six steps

reportThis approach helps avoid blind spots, inappropriate camera choices and infrastructure problems that are expensive to correct after installation.

Plan My Factory CCTV Systemarrow_forward Factory CCTV System Designarrow_forward

Why Yendra

Built for Industrial CCTV. Not Just Camera Installation.

architecture

Site-Specific Planning

We plan camera coverage around your actual factory layout, operations and security requirements.

cable

Industrial Infrastructure

Long cable runs, outdoor areas, underground conduit, PoE networking and multi-zone deployments require more than standard installation.

sync_alt

End-to-End Execution

From site survey and design through installation, configuration, testing and handover.

phonelink

Remote Visibility

Monitor live and recorded footage remotely when your system is designed for secure remote access.

swipeSwipe for all four

Yendra's factory CCTV approach combines site assessment, system design, infrastructure planning, installation and ongoing support — part of our wider factory & industrial security work.Assessment, design, installation and support — beyond CCTV too.

See Our Factory CCTV Installation Processarrow_forward

Your next step

Planning CCTV for Your South Bangalore Factory?

Tell us what you need to protect. We'll assess your facility and recommend the right CCTV system for your production areas, warehouses, access points and perimeter.Tell us what you need to protect — we'll recommend the right system.

call
Call Yendra+91 93533 16120
Serving
  • Bommasandra
  • Jigani
  • Electronic City
  • Bommanahalli
  • Attibele
  • Anekal
  • Hosur
  • Shoolagiri

Book a South Bangalore Factory Site Survey

30 sec

Pick what applies — we'll send it to Yendra on WhatsApp.

1Where is your facility?
2What do you need to protect? (pick any)
3Your situation
assignmentPick your area and what you need covered, or just tap below — we'll take it from there.
event_availableBook a South Bangalore Factory Site Survey callCall Yendra

FAQ

Frequently Asked Questions

Factory CCTV across South Bangalore, Hosur and Shoolagiri — the questions we're asked most.The questions we're asked most.

Book a Factory Site Surveyarrow_forward
Do you install factory CCTV in Bommasandra?add

Yes. Yendra provides factory and industrial CCTV system design and installation across South Bangalore and the surrounding industrial corridor, including Bommasandra.

Do you cover Electronic City and Bommanahalli?add

Yes. These areas fall within the South Bangalore service area.

Do you install CCTV in Hosur and Shoolagiri?add

Yes. Yendra has delivered an industrial 32-camera CCTV deployment in Shoolagiri, including production, yard, perimeter and access-point coverage. See the 32-camera Shoolagiri industrial CCTV case study.

Can you install CCTV across a large factory campus?add

Yes. Large industrial sites may require multiple coverage zones, long cable runs, underground conduit, PoE networking, recording infrastructure and remote monitoring. The system should be designed around the site before installation.

Can you design CCTV for a new factory?add

Yes. Planning CCTV alongside the facility layout allows camera positions, cable routes, network infrastructure and storage requirements to be considered before installation. Read how factory CCTV is designed before installation.

Can you upgrade an existing factory CCTV system?add

Yes. An existing system can be assessed for blind spots, camera positioning, image quality, recording, network infrastructure and storage before deciding what should be retained, upgraded or replaced.

How many CCTV cameras does a factory need?add

There is no fixed number. Camera requirements depend on the facility layout, areas requiring coverage, viewing distances, identification requirements, perimeter size and operational needs. See what factory CCTV installation costs.

Can factory CCTV be monitored remotely?add

Yes. When the system and network are designed for secure remote access, authorised managers can view live and recorded footage remotely.

How do I get a CCTV recommendation for my factory?add

Start with a site survey. Yendra can assess your facility, identify the areas that need coverage and recommend the appropriate cameras, network, storage and monitoring setup.

Your Factory Is Different. Your CCTV System Should Be Too.

Plan the coverage first. Install the right system.

Book a South Bangalore Factory Site Surveyarrow_forward